|
Your
System(s) will receive the following:
|
| Spring
- 15 Item INSPECTION FOR Air Conditioner system clean and service |
- Clean and Check A/C Condenser Coil
(outside)
- Check Voltage and Amperage on Motor
- Clean, Check and Adjust Condenser Fan
(outside)
- Check Condensate Drain Line or Pump.
Clean if Necessary
- Check A/C Condensing Unit for Proper
Refrigerant Charge
|
- Change/Clean Air Filter
- Clean and Check Thermostat Operation
- Lubricate All Moving Parts Where
Necessary (outside)
- Check Safety Controls Where Applicable
- Check Air Circulation - No Balancing
|
- Check All Electrical Connections
- Check Starting Contactor Contacts
- Check Temperature Drop at Evaporator
Coil
- Check Indoor Fan/Motor Drive
- Check Crankcase Heater
|
| fall
- 15 Item INSPECTION FOR heating system clean and service |
- Clean and Check Burner Operation,
adjust if necessary
- Clean Heat Exchanger
- Check Manifold Gas Pressure, adjust if
necessary
- Check High Limit Control, adjust if
necessary
- Check Fan Control
|
- Check Flue for Proper Venting
- Clean and Check Thermostat Operation
- Check Heat Anticipator Setting, adjust
if necessary
- Check Air Flow for Proper Temperature
Rise
- Check and Adjust Indoor Blower
|
- Lubricate All Moving Parts where
necessary (inside)
- Clean, Check and Adjust Pilot Assembly
- Check for Gas Leaks
- Check All Electrical Connections
(furnace)
- Change/Clean Air Filter
|
